Winegard TRAVELNET TN-2033 - Manual (Page 5)

Ver. 1.5
4/1/2009
- 5 -
Figure 6
6. Carefully attach the antenna cables to the SMA Antenna Mounts on the TravelNet
router. Caution should be taken to not over tighten the SMA cable connectors.
Figure 7
7. Connect power supplies for both devices to AC source or 12VDC source. When
a 12 VDC source, order the appropriate pigtail accessories and please save the 12 volt
power supply for the coach owner. Note that if using RV’s DC power, the power inputs
are polarity sensitive. NOTE: The lead with the white stripe is +12 VDC.