Weslo Daybreak 207 WLHS20702 - Manual (Page 10)

10
USING THE SPA
The spa is designed to seat two adults. The spa holds
150 gallons of water and offers an automatic, pro-
grammable heating (70° F to 104° F) and filtration
system. Seven thera-jets soothe and relax tired, sore
muscles, and the strength of the massage is
adjustable. Follow the guidelines below to use and
maintain the spa for your long-term enjoyment.
PLUGGING IN THE SPA
Once the spa is filled with water, the power cord can
be plugged in and the spa can be turned on. Note:
The first time the power cord is plugged in, the spa
will turn on automatically.
When connecting the power cord, plug the power cord
directly into a grounded circuit capable of carrying 15
amps. No other appliance should be on the same cir-
cuit. Replace the power cord immediately if it
becomes damaged.
There is a
Ground Fault
Circuit
Interrupter
(GFCI) on the
end of the
power cord.
Always test
the GFCI
before using
the spa.
First, turn on the spa by pressing the pump control on
the console. Once the unit is running, press the GFCI
“test” button. The spa should shut off. Press the
“reset” button. The spa should resume normal opera-
tion. If the spa continues to run after the “test” button
is pressed, the GFCI is damaged. Do not use the spa
until the GFCI has been repaired or replaced by a
qualified electrician.
Test and Reset
Buttons
Grounded
circuit capa-
ble of carry-
ing 15 amps
GFCI
POSTING THE WARNING SIGN
The included warning sign, shown below, must be posted on a wall or fence where it will be visible to all
users of the spa. If the spa is moved, the sign must also be moved and reposted near the spa. If the sign
becomes lost or illegible, call our toll-free Customer Hot Line at 1-877-897-7493 to obtain a free replace-
ment sign. Post the sign as described above.