Soundplus, Value courtroom system, Model wir sys 2 – Williams Sound SoundPlus Value Courtroom System WIR SYS 2 User Manual
Page 2
S
o
u
n
d
P
lu
s
®
V
a
lu
e
C
o
u
rt
ro
o
m
S
y
st
e
m
•
M
o
d
e
l
W
IR
S
Y
S
2
SoundPlus
®
Value Courtroom System •
Model WIR SYS 2
D
D
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
©2010, Williams Sound Corp. MCAT 028E
2
Dimensions, Weight:
11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm), 1.9 lbs (0.9 kg)
Color:
Black with white legends, red acrylic lens
Power Supply:
Wall Transformer, 24 VAC, 50-60 Hz, 35 VA, 3-pin MOLEX Connector
North America:
TFP 010, UL/CSA
Europe:
TFP 027-01, 2-pin Schuko plug, CE
UK:
TFP 027-02, 3-pin UK plug, CE
Note: Each WIR TX9 requires its own power supply
Power Cable:
NEC Class 2 wiring, two-conductor, 18 ga, 200’ (61 m) max. length
Indicators:
Green LED power indicator, red LED baseband indicator
Carrier Frequency:
50 kHz to 8 MHz
Emitter IR Power:
3.5 watts
Coverage Area:
Up to 28,000 ft
2
(2,600 m
2
) in single-channel mode when using the RX22-4 Receiver
Up to 18,000 ft
2
(1,700 m
2
) in two-channel mode when using the RX22-4 Receiver
Up to 3,500 ft
2
(325 m
2
) in single-channel mode when using the RX14-2 Receiver
Up to 3,063 ft
2
(285 m
2
) in single-channel mode when using the RX18 Receiver
(See coverage area diagrams)
Baseband Input:
BNC, 100 mV per carrier, 50
Ω
, for use with WIR TX9 or MOD 232 only
Baseband Output:
BNC, 50
Ω
, for use with TX9 only
Baseband Cable:
RG 58 Coax, BNC connectors, maximum 1000' (300 m) length
Operating Requirements:
0-50º C ambient temperature, non-condensing, non-corrosive atmosphere
Mounting Kits:
Wall or Ceiling Mount: BKT 024 Omnidirectional mount, Mic Stand Kit: SS-11 or SS-6
Warranty:
5 years on Emitter, 90 days on accessories
Approvals:
CE, FCC, RoHS, WEEE
Compatible Receivers:
WIR RX22-4 Four-Channel Receiver, RX14-2 Two-Channel Receiver,
RX18 Two-Channel Receiver
Configuration
Switches
Input CH A
Input CH B
Audio Line
Output
CH A
CH A
CH B
CH B
50 Ohms
100 Ohms
Made in USA
24V
24 VAC, 15 VA, 50-60 Hz
Power In
Baseband
Input
Output
Output
MOD 232 Infrared System Modulator
Plug
Williams Sound
123 45678
123 45678
Fig. 2: MOD 232 Rear Panel
Power Input:
3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA
Audio Input Jack:
CHA and CHB combination XLR/TRS jack
Mic Level:
Balanced, Lo-Z, 100 µV min. to 90 mV max., 1mV nominal, 3 k
Ω
input impedance, sup-
plies switchable simplex power per DIN 45596 for condenser mics
Line Level:
Balanced or unbalanced, 21 mV min. to 10 V max., 212 mV nominal, 100 k
Ω
Audio Line Output Jacks:
RCA Jack, CHA and CHB, 500 mV, unbalanced, 100
Ω
source impedance, load imped-
ance must be greater than 1k
Ω
Configuration Switches:
CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex
power, discrete or mixed inputs, carrier frequency, channel disable, auto shut-off
timer
Baseband Input Jack:
BNC, allows mixing with additional MOD 232 Modulator (4CH operation), 100mV, 50
Ω
input impedance, use with MOD 232, BNC, RG-58 Cable
Baseband Output Jack:
Two BNC jacks carry baseband signal, 100 mV/channel, 50
Ω
source impedance, for use
with WIR TX9 or MOD 232 only
Approvals:
CE, FCC, RoHS, WEEE
Operating Requirements:
0-50º C ambient temperature, non-condensing, non-corrosive atmosphere
Warranty:
5 years on modulator, 90 days on accessories
WIR TX9 Emitter: