Western Telematic RMM-288 User Manual
Page 7
* DP Pulse (Rotary) Dial Mode
DR Originates call using answer (reverse) frequencies.
DSn Dials phone number string stored in NVRAM at position n (n = 0-3).
Phone numbers are stored with the &Zn=s command.
DT Tone Dial Mode
D,
(Comma) Two Second Pause. Comma pause duration can be
redefined via the S8 Register.
D;
(Semicolon) Return to Command Mode after dialing.
D" Dials the letters that follow (in an alphabetic number).
D!
(Exclamation Point) Flashes the switch hook.
D/
Delays for 125 msec before proceeding with dial string.
DW Wait for second dial tone (X3 or higher). Linked to S6 Register.
D@ Dials, waits for 5 seconds of silence after detecting ringbacks, and
then continues (X2 or X4).
D$ Displays a list of dial commands.
En
Sets local echo. (Also controlled by DIP Switch 4).
E0
Echo Off
*
E1
Modem displays keyboard commands.
Fn
Sets online local echo of transmitted data On/Off.
F0
Local echo ON. Modem sends a copy of data it sends to the remote
system to your screen.
*
F1
Local echo OFF. Receiving system may send a remote echo of data it
receives.
Hn
Controls On/Off Hook
H0 Hangs up (goes on hook)
H1 Goes off hook
In
Displays the following information:
I0
Four-digit product code
I1
Results of ROM checksum
I2
Results of RAM checksum
I3
Product type
I4
Current modem settings
RMM Rack Mount Modem; User's Guide
file:///C|/WEBPAGE/guides/rmm/rmm_manl.htm (7 of 21) [2/7/2000 10:55:43 AM]