Wharfedale LY22T3CBW-UM - Manual (Page 38)

Start/Exit Streaming Media Playing System
1. Press SOURCE on the remote control unit to select the streaming
media function.
2.Insert USB equipment into corresponding USB interface 2s after starting
the system.
3. After entering the system menu, press Left / Right on the
remote control unit to select the require USB equipment press “OK”
button to confirm the selection and enter the interface .
5. To exit the streaming media playing system and watch a TV program,
you must press “BACK”button to return to the streaming media main menu
at first(to protect equipment), and thenpress
SOURCE to select TV to
return to the TV mode.
Notes:
1.While playing non-pictures or non-music files, press “MENU” or “SOURCE”,the
TV screen will be black and display corresponding menu.
2.While playing a USB ,press “BACK”, the screen picture will return to USB
main interface, and only at this time you can switch corresponding signal sources
by pressing “SOURCE” again.
4. Press Left / Righr to change pages then press UP /
DOWN on the remote control unit to select the required file,
press OK button to enter the selected file.
Streaming Media Playing System