ZyXEL Communications ZyXEL Dimension ES-2024 User Manual
Page 154
Dimension ES-2024 Ethernet Switch
25-4
Introduction to CLI
Table 25-1 Command Summary: sys
COMMAND DESCRIPTION
encapmask
[mask]
Shows which type of encapsulation
the trace log records or sets it if
you specify the encapsulation’s
hexadecimal character.
trcpacket
create <entry> <size>
Creates a packet trace buffer.
destroy
Removes the packet trace buffer.
channel
<name>
[none|incoming|outgoing|bothway]
Sets the packet trace direction for
a given channel.
string
[on|off]
Enables/disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting.
switch
[on|off]
Enables/disables packet trace or
displays the current setting.
disp
Displays the trace packets.
udp
Sends the trace packets to another
system using UDP.
udp switch [on|off]
Enables/disables the sending of
the trace packets to another
system using UDP or displays the
current setting.
udp addr <addr>
Sets the target IP address for
sending trace packets using UDP.
udp port <port>
Sets the UDP port (should match
that of the target IP address) for
sending trace packets using UDP.
parse [[start_idx], end_idx]
Displays detailed packet details of
the packet range specified.
brief
Displays a brief listing of packet
contents.
version
Displays the RAS code and driver
versions.
view
view
<filename>
Displays the specified text file.
wdog
switch
[on|off]
Turns the watchdog firmware
protection feature on or off.
cnt
[value]
Sets (0-34463) or displays the
current watchdog count (in 1.6 sec
units).