Yamaha EMX100RDS - Manual (Page 51)

E-43
English
CAUSE
Disc is upside down.
Disc is dirty.
The setting of INPUT SELECTOR is
incorrect.
Disc is dirty.
Volume is set too high.
Batteries are dead.
Remote control transmitter is too far away
or is being used at incorrect angle.
Direct sunlight or lighting (of an inverter
type of fluorescent lamp etc.) is striking
the remote control sensor of the main unit.
Remote control transmitter is being used
near TV set with a remote control sensor.
SYMPTOM
Playback will not begin even if disc is
loaded.
No sound.
Sound stops suddenly (always at same
spot).
Remote control transmitter doesn’t
work.
TV functions strangely when the remote
control transmitter is used.
TROUBLESHOOTING
REMEDY
Load disc label side up.
Clean disc.
Select the CD player by turning the INPUT
SELECTOR.
Clean disc.
Lower volume.
Replace batteries.
Use within 6 m and 60° radius.
Change position of the main unit.
Relocate this unit away from the TV or cover TV’s
remote control sensor.
CD PLAYER
REMOTE CONTROL