Playing the pads, Manual play) 16, Playing by tapping the pads – Zoom RT-123 User Manual

Page 16: Step, Press the [pattern] key. step, Press the [drum a] key, Tap a pad while holding the [repeat/step] key down, Tap one of the pads, Playing the pads (manual play), Pattern

Advertising
background image

This activates the pattern mode. The [PATTERN] key LED lights up.

During manual play, you use the [DRUM A] key, [DRUM B] key, and
[BASS] key to select the desired drum kit or bass program. (The
LED of the selected key lights up.) Pressing the [DRUM A] or
[DRUM B] selects drum kit A or B. Pressing the [BASS] key selects
the bass program. In this example, let's use drum kit A.

The LED of the pad lights up briefly and the sound assigned in the
drum kit to that pad is heard. The volume changes according to
how strongly you tap the pad.

The sound will be produced continuously for as long as the pad is
pressed. The repetition speed depends on the tempo.

Playing by tapping the pads

Playing the Pads

(Manual Play)

16

Playing

the

Pads

(Manual

Play)

STEP

PATTERN(SONG REC)

II

REAL-TIME REC

Groove PLAY

MODE

OPEN HAT

7

CLICK VOL

TOM 3

6

QUANTIZE

TOM 2

4

TIME SIG

TOM 1

2

MIX

EXTRA 1

9

FOOT SW

EXTRA 2

11

PAD SENS

EXTRA 3

13

MIDI

CLOSED HAT

5

PRE COUNT

SNARE

3

BASS TUNE

KICK

1

BASS KEY

CRASH

8

BAR LENGTH

RIDE

10

SWING

EXTRA CYMBAL

12

SHIFT

FUNCTION

REPEAT/STEP

INSERT/COPY DELETE/ERASE

BASS MUTE

BASS

DRUM A

DRUM B

STOP/EXIT

PLAY

TEMPO

+

General Drums

Techno Beat

Rap/HipHop

Modern Drums

Ballad Set

50-54

45-49

40-44

35-39

Funk Trap

Standard Kit

Studio Drums

Live Rock

Basic Drum Kits

20-24

15-19

10-14

00-09

Bass
Programs

00-24

STEP REC

SONG

PATTERN

1

3, 4

2

4

The RT-123 lets you not only play back existing patterns and songs, it also allows you to manually play

the unit by tapping the pads. This section describes how to manually play the unit.

The RT-123 assigns various sounds to the pads, depending on the currently selected drum kit. Play the
pads to discover the realistic sounds offered by the RT-123.

STEP

1

Press the [PATTERN] key.

STEP

2

Press the [DRUM A] key.

When the [BASS] key is pressed in step 1, a bass program can be
played, but there is a difference in how the pads operate. With a
drum kit, the sound plays through even if the pad is released
immediately. With a bass program, the sound continues only as
long as the pad is pressed.

HINT

HINT

STEP

4

Tap a pad while holding the [REPEAT/STEP] key down.

You can adjust the interval for repeated play. See the "Quantize"
section on page 46.

HINT

HINT

DRUM A

PATTERN

PAD

REPEAT/STEP

PAD

STEP

3

Tap one of the pads.

Advertising