Yamaha AV Receiver - Manual (Page 11)

7
English
INTR
ODUCTION
Approximately 6 m (20 feet)
u SELECT k/n
Set the remote to control a component other than the one
selected with the input selector buttons.
i AMP
Switches the function of the same controls between AMP
and the component selected using the input selector
buttons.
o VOL +/–
Increase or decrease the volume level.
p MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
a SET MENU
Selects the set menu mode.
s ON SCREEN
Displays the input or operation status on the on-screen
display.
d STEREO/EFFECT
Switches between normal stereo and DSP effect
reproduction. When you select STEREO the unit mixes
down all Dolby Digital and DTS signals (except the LFE
channel) as well as those 2-channel signals without effect
sounds, to the main left and right speakers.
f 6.1/5.1
Switches the Dolby Digital EX or DTS ES decoder on or
off.
g NIGHT
Sets the unit in night listening mode.
■ Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
■ Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
INPUT
AUTO/MANUAL MONO MAN`L/AUTO FM
TUNING MODE MEMORY EDIT
PRESET/TUNING FM/AM
OPTICAL R AUDIO L VIDEO S VIDEO EFFECT
PRESET/TUNING
SET MENU
A/B/C/D/E
NEXT
PROGRAM STEREO SPEAKERS B A
6CH INPUT INPUT MODE
SILENT
PHONES
TREBLE
VOLUME
BASS VIDEO AUX
STANDBY /ON
CODE SET
30 ° 30 °
CONTROLS AND FUNCTIONS
0102RX-V740_01-08_EN-U.P65 03.1.10, 6:28 PM 7