Zanussi VMB070 - Manual (Page 24)

Using the On­Screen Menu
5
18
2. F(5"8$5" Left/Right Arrow buttons on the remote (or
the - / + controls on the TV) to highlight the Inputs icon
and press OK. The Input Source menu is displayed.
3. F(5"8$5" Up/Down Arrow buttons on the remote (or
the !"#$ controls on the TV) to highlight the input source
you wish to display and press OK.
Adjusting TV Settings
From the TV Settings Menu, you can:
!" Change the input source
!" Change the screen mode
!" G7=:(8"8$5"A*.8:-5"(588*&)(
!" G7=:(8"8$5"8:&5-"(588*&)(
!" Set the parental controls
!" Change the on-screen menu language
!" Set the time
!" Reset the TV to its factory settings
!" Run the Setup Wizard
To quickly display the Input Source menu, press the INPUT button on the remote. Press the INPUT
button again to change the input source. Press OK when the input source you wish to display is
highlighted.