ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx - Manual (Page 224)

Chapter 15 Bandwidth Management
P-660HWP-Dx User’s Guide
36
Figure 129 Subnet-based Bandwidth Management Example
15.4 Application and Subnet-based Bandwidth Management
You could also create bandwidth classes based on a combination of a subnet and an
application. The following example table shows bandwidth allocations for application specific
traffic from separate LAN subnets.
15.5 Scheduler
The scheduler divides up an interface’s bandwidth among the bandwidth classes. The P-
660HWP-Dx has two types of scheduler: fairness-based and priority-based.
15.5.1 Priority-based Scheduler
With the priority-based scheduler, the P-660HWP-Dx forwards traffic from bandwidth classes
according to the priorities that you assign to the bandwidth classes. The larger a bandwidth
class’s priority number is, the higher the priority. Assign real-time applications (like those
using audio or video) a higher priority number to provide smoother operation.
Table 85 Application and Subnet-based Bandwidth Management Example
TRAFFIC TYPE FROM SUBNET A FROM SUBNET B
VoIP 64 Kbps 64 Kbps
Web 64 Kbps 64 Kbps
FTP 64 Kbps 64 Kbps
E-mail 64 Kbps 64 Kbps
Video 64 Kbps 64 Kbps