ZyXEL Communications Prestige 2602H Series - Manual (Page 155)

Prestige 2602H/HW Series User’s Guide
Chapter 9 Voice Screens 155
9.14 Call Forward Configuration
Click Voice in the navigation panel and then Call Forward to display the following screen.
Use this screen to configure the Prestige to block or redirect calls. You can configure a
different call forwarding table for each SIP account or use the same call forwarding table for
both. See
Section 9.3 on page 140 to set which call forwarding table each SIP account uses.
Incoming Lifeline
Call mapping to
(Lifeline models
only)
Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2
ports, respectively. Select whether you want to receive regular (PSTN) phone
calls on Phone 1, Phone 2 or both. If you select both, all of the phones
connected to the Prestige’s PHONE ports will ring when a call comes in on the
PSTN line.
Call Service Mode Use this field to set how the Prestige handles supplementary phone services
(call hold, call waiting, call transfer and three-way conference calls). Select the
mode that your voice service provider supports.
Select Europe Type to use the supplementary phone services in European
mode.
Select USA Type to use the supplementary phone services American mode.
Note: To take full advantage of the supplementary phone
services available though the Prestige's phone ports, you may
need to subscribe to the services from your voice service
provider.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to begin configuring this screen afresh.
Table 45 Voice Common (continued)
LABEL DESCRIPTION