ZALMAN CNPS9500 AT - Manual (Page 2)

1
.COM
1. Precautions
2. Specifications
Model
Spec.
CNPS9500 AT
Material Pure Copper
Weight 530g
Dimensions 85(L) 1 12(W) 125(H)
Fan
Bearing-type 2 Ball-Bearing
RPM 1,300rpm ± 30% ~ 2,650rpm ± 10%
Noise Level 18.0dBA ± 10% ~ 27.5dBA ± 10%
Input Voltage 12V
Fan Function PWM Control, Auto Restart
1) Use and keep product away from reach of children and pets.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or
irritation persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this
product.
4) Excessive force exerted on the fan may cause damage to the fan and/
or system.
5) Avoid inserting objects or hands into the fan while it is in operation to
prevent product damage and injuries.
6) Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
7) Zalman Tech Co., Ltd. is not responsible for any damages due to
overclocking.
8) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the
transport of a system.
9) Product design and specifications may be revised to improve quality
and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.