Yamaha DM2000 - Manual (Page 234)

234
Chapter 19—Pro Tools Remote Layer
DM2000 Version 2—Owner’s Manual
[REC] (WRITE), [ABORT/UNDO] (TOUCH), [AUTOREC] (LATCH),
[RETURN] (READ), [RELATIVE] (TRIM) & [TOUCH SENSE] (OFF) buttons
These buttons are used to select the channel Automation modes. See “Setting the Automa-
tion Mode” on page 250 for more information.
OVERWRITE [FADER] (FADER), [ON] (MUTE), [PAN] (PAN), [AUX]
(SEND), [AUX ON] (SEND MUTE) & [EQ] (PLUG-IN) buttons
These buttons are used to select parameters for automation recording and playback. See
“Arming Parameters for Automation” on page 251 for more information.
USER DEFINED KEYS Section
[DISPLAY] (STATUS) button
This button is used to open and close the Session Setup window.
[1] (TRANSPORT) button
This button is used to open and close the Transport window. Its indicator lights up while
the Transport window is open.
[2] (< BANK) & [3] (BANK >) buttons
These buttons are used to swap channel banks 24 channels at a time.
[4] (SHIFT/ADD) & [5] (OPTION/ALL) buttons
These buttons are used in conjunction with other buttons to modify function operation.
They correspond to the Shift and Option modifier keys found on Macintosh keyboards.
[6] (GROUP) button
This button is used to display group information for all channels. While it’s pressed, the
channel strip displays show the ID of any group in which each channel is assigned.
[7] (SUSPEND) button
This button is used to temporarily suspend all mix groups (not edit groups). Its indicator
flashes while mix groups are suspended.
[8] (CREATE) button
This button is used to open the New Group window (Command-G in Pro Tools).
[9] (MIX/EDIT)
This button is used to toggle between the Mix and Edit windows.
[10] (< CH) & [11] (CH >) buttons
These buttons are used to scroll channels one at a time.
(TRANSPORT)
(STATUS)
( BANK) (BANK ) (SHIFT/ADD)(OPTION/ALL) (GROUP) (SUSPEND) (CREATE)
(MIX/EDIT) ( CH) (CH ) (CTRL/
CLUTCH)
(Command
ALT/FINE)
(MONITOR) (UNDO) (SAVE)
USER DEFINED KEYS
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
DISPLAY