Inspecting and replacing anode(s), Checking battery (for electric start models), Inspecting and replacing – Yamaha F225D User Manual
Page 64: Anode(s), Checking battery, For electric start models), Maintenance
Maintenance
58
6.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7.
Insert and tighten the gear oil drain
screw.
EMU29312
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
CAUTION:
ECM00720
Do not paint anodes, as this would render
them ineffective.
NOTE:
Inspect ground leads attached to external an-
odes on equipped models. Consult a Yamaha
dealer for inspection and replacement of inter-
nal anodes attached to the power unit.
EMU29320
Checking battery (for electric start
models)
WARNING
EWM00330
Battery electrolytic fluid is dangerous; it
contains sulfuric acid and therefore is poi-
sonous and highly caustic.
Always follow these preventive measures:
●
Avoid bodily contact with electrolytic
fluid as it can cause severe burns or per-
manent eye injury.
●
Wear protective eye gear when handling
or working near batteries.
Antidote (EXTERNAL):
●
SKIN - Flush with water.
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F200TR 1150.0 cm³ (38.88 US oz)
(40.56 Imp.oz)
F225TR 1150.0 cm³ (38.88 US oz)
(40.56 Imp.oz)
LF200TR 1000.0 cm³ (33.81 US oz)
(35.27 Imp.oz)
LF225TR 1000.0 cm³ (33.81 US oz)
(35.27 Imp.oz)
ZMU01902
U69J14E0.book Page 58 Friday, March 12, 2004 10:20 AM