Ftp file transfer, 9 ftp file transfer – ZyXEL Communications Prestige 642 User Manual
Page 45
Prestige 642 ADSL Internet Access Router
10-16
System Maintenance
Send/Fetch
Press “Send” to upload the file to the Prestige and “Fetch” to
back up the file on your computer.
Local File
Enter the path and name of the firmware file (*.bin
extension) or configuration file (*.rom extension) on your
computer.
Remote File
This is the filename on the Prestige. The filename for the
firmware is “ras” and for the configuration file, is “rom-0”.
Binary
Transfer the file in binary mode.
Abort
Stop transfer of the file.
TFTP over WAN will not work if:
1. You have applied a filter in Menu 3.1 (LAN) or in Menu 11.5 (WAN) to block Telnet service.
2. You have an SMT console session running.
10.9 FTP File Transfer
In addition to uploading the firmware and configuration via the console port and TFTP client, you can also
upload the Prestige firmware and configuration files using FTP. To use this feature, your workstation must
have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.