Yamaha CNR-35 3 CNR-55 - Manual (Page 10)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rhythm Select
2Using the SYNCHRO START button
This button puts the rhythm pattern in “stand-by” (The SYN-
CHRO START lamp lights and the BEAT lamp flashes.).
The rhythm and the accompaniment will start when you press
a key in the Auto Accompaniment Section of the keyboard
(C1 - F#2).
To stop the rhythm, press the SYNCHRO START button
again or START / STOP button.
(For more about the Automatic Accompaniment, see page 9)
3 Set the volume of the rhythm with the
ACCOMP./ RHYTHM VOL. buttons.
......................................................................................................................
Press one of the buttons repeatedly in the direction you wish
to adjust the volume. This control affects not only the volume
of the rhythm sound, but also the bass and chordal accompani-
ment. It is used to adjust the level balance between the main
voice and the rhythm / accompaniment.
4
Set the tempo with the TEMPO buttons.
....................................................................................................
The TEMPO buttons allows you to adjust the speed of the
rhythm. Press one of the TEMPO buttons, according to whether
you want to increase the tempo (▲) or decrease it (▼). To re-
store the normal tempo setting for each rhythm pattern, press
both tempo buttons simultaneously.
• The BEAT lamp flashes every first beat of each
measure during playback. It flashes every beat while
the rhythm is in “stand-by” for the Synchro Start.
ACCOMP.
/RHYTHM
VOL.
BEAT TEMPO
BEAT TEMPO
START
/STOP
SYNCHRO
START
8