Connecting the antennas, Connecting indoor fm antenna, Connecting the am loop antenna – Yamaha AVX-S80 User Manual

Page 18

Advertising
background image

14

CONNECTIONS

Connecting the antennas

Both AM and FM indoor antennas are included with this
system. In general, these antennas should provide
sufficient signal strength.
Connect each antenna correctly to the designated
terminals.

Connecting indoor FM antenna

Connect the included indoor FM antenna to the FM ANT
terminal.

DIGITAL AUDIO IN

DVD/CD

OPTICAL

O

V

AM ANT

FM ANT

GND

75

UNBAL.

Ground (GND terminal)

In some cases, you can reduce
interference by connecting the
antenna GND terminal to a good
earth ground. A good earth ground
is a metal stake driven into moist
earth.

Indoor FM antenna

(included)

AM loop antenna
(included)

Connecting the AM loop antenna

1

Set up the AM loop antenna, then connect it.

2

Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and
GND terminals.

3

Release the tab. (The tab will return to its
original position when you release your
finger.)

Once connected, pull the wires gently to check that
they are connected securely.

4

Orient the AM loop antenna for the best
reception.

y

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about the
outdoor antennas.

Notes

• The AM loop antenna should be placed away from this system.
• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this system.

Bare wire

Tab

(U.S.A. model)

E3-S80-8-18(6.29)a

02.6.29, 4:32 AM

14

Advertising