Zoom Game Point! 4420 - Manual (Page 19)

Chapter 3: Advanced Options 19
The following table lists each page that you can access from the
Web Management Interface. Each page is described in detail
later in this chapter.
Menu Item Page Use this Page to...
Password
Setting Specify a password to restrict access to the
Game Point!’s Web Management
Interface. System
Operation
Mode Specify whether to use the Game Point! as
client bridge infrastructure or client bridge
ad hoc. (Infrastructure is the default.)
LAN LAN Settings Specify a new name for the Game Point!
device. By default, the name is set to
Game Point!. You can also specify static IP
addresses and a subnet mask if you are
using multiple Game Points!.
Settings Specify wireless settings, such as SSID
and channel information. The settings you
can specify on this page depend on the
operation mode of the Game Point!.
WEP
Configuration Specify WEP encryption settings for the
Game Point! to protect the wireless
network from unauthorized use. By default,
no security is applied.
Wireless
Site Survey Have the Game Point! search for and
display available wireless access points.
This page is only accessible when the
Operating Mode is set to Client Bridge
(Infrastructure).
Configuration
Tool Backup the Game Point!’s current
configuration, restore the unit to a saved
configuration, or reset it to its factory
defaults.
Firmware
Upgrade If Zoom releases updated software for the
Game Point!, upgrade the firmware.
Reset Reset the Game Point!, but retain the
current configuration.
Tools
Status View the current status of the Game Point!,
the wireless network, or the local area
network.