X10 Wireless Technology VK79A - Manual (Page 19)

37 36
Restore Presets (defaults)
The settings in the PRESET menu work to set the camera back to its
default configuration. This will discard any changes you made in any of the
other video settings menus.
· PRESET: When you select this option and change it to “ON,” all the
settings in the camera will be changed to their defaults. The camera will
reset itself, so the picture will go dark temporarily.
· INITIAL: When selected, the camera will initialize autofocus by
focusing through the entire range of the lens.
· PHASE: This option is not enabled in the camera and cannot be changed.
Advanced Onscreen Menu Options Advanced Onscreen Menu Options
Use the Up and Down arrows to
select the desired position on the
screen (up/top or down/bottom).
Then use the Up and Down arrows
to select characters from the screen
above, selecting each character with
the Right Arrow. Then back out to
the main menu with successive
presses of the Left arrow.
Onscreen Camera Label (ID)
The Sentinel Camera can display a title or label for the camera on screen.
This can be useful when you have more than one camera and want to
identify them easily.
· Select characters from the available list to set the title you want to use.
· UP: Sets the position for display of the title to the top of the screen.
· DOWN: Sets the position for display of the title to the bottom of the
screen.
If you don’t select your own title, the camera will default to displaying the
camera’s address setting as the title – “CAMERA A1” for example.