Zanussi ZCM 700 X - Manual (Page 25)

25
Feet Assembly
Before installing the cooker, it is necessary to
assemble the supplied feet. You can find them into
the oven cavity.
1. Remove the hob pan supports, the burner
caps and crowns.
2. Carefully lean the cooker on its back (Fig.
1), paying attention not to cause any
damage.
3. Adjust the feet height. A height indicator is
printed on the last page of this Instruction
book (Fig. 2). Lean the foot on the page and
make the foot match with the indicator,
then unscrew the bottom part of the foot,
until you obtain the required height. Repeat
the same operation with the other feet.
4. Screw the feet into the relevant holes
indicated in figure 1.
5. Lift the cooker in vertical position. Replace
the crowns, the burner caps and the hob pan
supports.
6. If necessary, adjust the cooker horizontal
levelling by turning the bottom part of the
feet, until the appliance is completely
stable. (Fig. 3). A spirit level should be
placed on a cake tray on one of the shelves
to confirm that the appliance is correctly
levelled.
FO 2283
Fig. 1
FO 2284
Fig. 2
FO 2285
Fig. 3
830 840 850 860 870 880 890 900 910
☞