Technical specifications, Fitting under a counter – Zanussi DA 6141 User Manual

Page 7

Advertising
background image

Dimensions

Width

60cm

Height with worktop

85 cm

Height without worktop

82 cm

Max depth

63,5 cm

Max depth with open door

115.2 cm

Electrical connection

Voltage

220/240 V - 50 Hz

Motor rating during wash

200 W

Power of heating element

2100 W

Overall power

2300 W

Water supply pressure

Minimum

50 kPa (0.5 bar)

Maximum

800 kPa (8 bar)

Capacity

12 place settings

Technical specifications

7

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under
a close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.

Proceed as follows:

-

Remove the machine’s worktop by unscrewing the
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with
the adjustable feet. When inserting the machine, ensure that
the water inlet and drain hoses are not kinked or squashed.

820

570 - 600

600

IN05

Advertising