Zoom 5809 - Manual

ATA Quick Start ATA Quick Start ATA Quick Start ATA Quick Start
Your ATA comes with a power cube and Ethernet cable. Some
models also include other items, such as a phone cord, phone-jack
adapter, phone filter, or service provider flyer.
To complete the installation, you need the following:
-
A broadband Internet connection using a cable modem,
ADSL, T1, E1, SDSL, or any other high-speed “always on”
Internet connection.
- An account set up with a VoIP service provider. If you
do not have an account set up, please look for a Read Me
First! flyer in the box for your VoIP ATA and follow its
instructions. If there is no flyer, go to your service provider’s
Web site and sign up for service.
- A router that uses your broadband Internet connection. This
can be an ADSL modem with a built-in router, a cable
modem with a built-in router, or some other router
connected to a broadband Internet connection. The router
needs at least one available LAN port, and the router needs
to be set up for 10/100 or 10/100/1000 or 10 Mbps. (Most
routers use 10/100 unless you change them.)
- A telephone so you can place and receive phone calls.
Now you’re ready to connect the ATA to a telephone, a router,
and a “live” power outlet. You will make your connections to the
back of the ATA.
1 11 1
Plug your telephone or cordless phone base station into the
ATA’s PHONE jack, which is on the far left of the ATA’s
back panel.
Note: In some countries outside the USA, you may need to use a phone-jack adapter.
Plug the adapter into the ATA’s PHONE jack and then plug in your phone .
2 22 2
Plug one end of the Ethernet cable into the ATA’s Ethernet
port and the other end into a LAN port of your router.
3 33 3
If your unit has the word TELCO on the front panel of the
unit, continue with step 4.
If your unit does not have the word TELCO on the front
panel, continue with step 5.
4 44 4
For ATA units with a TELCO jack: Plug one end of the
supplied telephone cord into the ATA’s TELCO jack and
the other end into your home or office’s telephone jack, one