Zonet Technology ZEW1642 - Manual (Page 6)

802.11n Wireless PCI Adapter
3
Chapter 3 Installation
3.1 Install Your ZEW1642
Open your PC case and locate an available PCI on the motherboard.
Slide ZEW1642 into the PCI slot. Make sure that all of its pins are touching the slot’s
contacts. You may have to apply a bit of pressure to slide ZEW1642 all the way in.
after it is firmly in place, secure its fastening tab to your PC’s chassis with a mounting
screw. Then close your PC.
Attach the external antennas to ZEW1642’s antenna port.
Power on the PC.
Select Cancel when “Found New Hardware” window appears.