Basic operation – Yamaha EM-202VCD User Manual
Page 31
E-23
English
PLAYBACK CONTROL OF VIDEO CD (Ver. 2.0)
Basic operation
Use the remote control transmitter for making Playback
Control operations.
Note
Disc playback in the Playback Control mode depends on the
data of the disc used. So, according to the contents of disc,
the following operating method may not be applied to the
disc.
Be sure to refer to the instruction manual for the disc.
1
Stop this unit and select a Video CD (version 2.0) by
pressing the DISC SKIP button on the remote control
transmitter .
*
“PBC” lights up on the display.
2
Press the SELECT button. A screen menu appears on the
TV monitor.
*
Some discs show several short movies sequentially
instead of a menu.
3
Select the number of item you want to play back by using
the track number input buttons.
*
If the disc shows several short movies sequentially,
press the SELECT button when a desired picture
appears.
4
Playback starts, or another menu appears. If another
menu appears, repeat step 3.
(Some discs have more than one screen menu.)
5
If “NEXT” or “
” appears on the screen during
playback, pressing the NEXT button will change to the
next menu.
If “PREV” or “
” appears on the screen during
playback, pressing the PREV button will restore the
previous menu.
Notes
●
In the Playback Control mode, the TIME and REPEAT
buttons are disabled.
●
If this unit is stopped, the PROG, RANDOM, DIGEST and
INTRO buttons can work even if this unit is in the Playback
Control mode. In this state, pressing one of these buttons
cancels the Playback Control mode.
TIME
A
PROG
B
C
D
+
I0
E
VCD/CD
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
INPUT
TIME INDEX
INTRO
DIGEST
POWER
DISPLAY
SLEEP
MUSIC
FLAT
PROGRAM
USER
VOLUME
DISC SKIP
RETURN
PREV
NEXT
SELECT
LEVEL
TEST
CENTER/REAR
/DELAY ECHO/
KEY
OPEN/CLOSE
INDEX
MODE
TUNER
5
1
3
2, 3