Yamaha G50 - Manual (Page 23)

2 0
Initialize
The Initialize operation resets all of the G50’s internal
settings to their original factory settings. By initializing
the G50, the Preset Program Memory U (User) type is
reset to the factory settings. The tuning pitch is reset to
440.
■ CAUTION
• All Program Data will be erased (overwrite) if the initialize
operation is carried out. All important data should be saved
to an external MIDI device with the MIDI Bulk Dump
operation.
1 . While holding both the [PLAY] and [+1] buttons,
switch the [POWER] ON.
Continue to hold both buttons until “FAC” appears in
the display.
Initialize
2 . Press the [ ▼ ] (“YES”) button to execute the initial-
ize operation.
“ini” will appear in the display after the operation is
finished, and the G50 will return to the play mode.
Memory number “001” will be automatically selected.
To cancel the initialize operation, press the [PLAY]
button. The operation will be aborted and the G50 will
return to the play mode.
PLAY
WRITE
+1
±10
Y# / VALUE
POWER
ON/ OFF
PARAMETER MEMORY#/VALUE
● Main Functions
Memory: 128
Guitar Setup
Playing Style, Note On Level, Note Off Level, Velocity,
Chromatic, Transpose, Pitch Bend Range
External Tone Generator Setup
Program Number, Program Bank MSB, LSB, Volume, Pan,
Assignable Control Number 1, 2, Assignable Control Value 1,
2
Real-time Control
Split, Split Memory 2 Number, Memory Location, Picking
Position Control, Picking Front Position Value, Picking Rear
Position Value, Touch Control, Sensitivity, Sustain/Hold Pedal
System Setup
Input Gain, MIDI Channel
Other
G1D Up/Down Button Function Settings (Data Entry,
Program Number, Octave Shift) Chromatic Tuner (Tuning
Pitch) Memory Save (Write), Memory Swap, Preset Program
Type (User, MU80/MU50, VL70-m, VL 1-m Version 2), MIDI
Bulk Receive and Transmit
■
Specifications
● Operation
Single digit union jack LED, 3 digit 7 segment LED, Mode
LED (Green x2, Red x1), Panel Switch x8, Power Switch,
Guitar/Bass Selector Switch
● Connections
DIVIDED Input Jack, MONO SYNTH Input Jack, GUITAR
DIRECT OUT Jack, MIDI IN/OUT Jack, SUSTAIN/HOLD Jack
(Footswitch: sold separately), DC-IN Jack
● Power Supply
PA-3B AC adaptor (or another Yamaha -recomended
adaptor)
● Accessory
13 Pin Cable: 7 m
● Dimensions (W x D x H)
482.6 x 201.8 x 44.0 mm (19" x 8" x 1-3/4")
● Weight
2.2 kg (4 lbs., 14 oz.)
* Specifications subject to change without notice.