ZyXEL Communications 202H - Manual (Page 195)

Prestige 202H User’s Guide
Filter Configuration 18-11
Table 18-3 Menu 21.1.7.1 TCP/IP Filter Rule
FIELD DESCRIPTION EXAMPLE
Port # Type the destination port of the packets you want to filter. The field
range is 0 to 65535. A 0 field is ignored. 0 to 65535
Port # Comp Select the comparison to apply to the destination port in the packet
against the value given in Destination: Port #. Choices are None,
Less, Greater, Equal or Not Equal. None
Source:
IP Addr
Type the source IP Address of the packet you want to filter. A
0.0.0.0 field is ignored. IP address
IP Mask Type the IP mask to apply to the Source: IP Addr field. IP mask
Port # Type the source port of the packets you want to filter. The range of
this field is 0 to 65535. A 0 field is ignored. 0 to 65535
Port # Comp Select the comparison to apply to the source port in the packet
against the value given in Source: Port # field. Choices are None,
Less, Greater, Equal or Not Equal. None
TCP Estab This applies only when the IP Protocol field is 6, TCP. If Yes, the
rule matches packets that want to establish TCP connection(s)
(SYN=1 and ACK=0); else it is ignored. No
(default)
More If Yes, a matching packet is passed to the next filter rule before an
action is taken or else the packet is disposed of according to the
action fields.
If More is Yes, then Action Matched and Action Not Matched will
be N/A.
No
(default)
Log Select the logging option from the following:
None – No packets will be logged.
Action Matched – Only packets that match the rule parameters will
be logged.
Action Not Matched – Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
None
Action
Matched Select the action for a matching packet. Choices are Check Next
Rule, Forward or Drop. Check Next
Rule
(default)