Zanussi 534275 - Manual (Page 2)

RACK TYPE DISHWASHERS
MODULAR RTM 200
EBCD10 2012-07-26 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L KIT SILASTIC CURTAINS FOR RACK TYPE DW 864245 864245 864245 864245
KIT SANITIZ(1 HEAT.EL)-MOD.RT 180/200R/H 864159 864159 864159 864159
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW 867051 867051 867051 867051
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW 867050 867050 867050 867050
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-900 864500 864500
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-600 864510 864510
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-900 864501 864501
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-600 864511 864511
EL. DRYING TUNNEL-CORNER-LEFT-MODULAR
RT 864513 864513
EL. DRY. TUNNEL-CORNER-RIGHT-MODULAR
RT 864512 864512
DRAIN KIT FOR MODULAR+COMPACT RACK
TYPE 864150 864150 864150 864150
BASKET FOR 5 HALF INSULATED TRAYS-RED 867005 867005 867005 867005
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT 864239 864239 864239 864239
RTM200ERA
534272
RTM200ELA
534273
RTM200ERB
534274
RTM200ELB
534275
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
� Power wash zone with 150 litre wash tank
with 2,2kW wash pump supplying upper was
arms, 1,1kW wash pump supplying lower
was arms. Maximum water contact wash
arms for best possible washing result.
� Separate wash and rinse zones so
detergent does not mix with the rinse aid and
is always active.
� Rinse area equipped with the DUO-rinse
system where the first ramp is filled by the
re-used final rinse water, to eliminate any
trace of detergent, and the second ramp is
filled by hot fresh water to guarantee
sanitation of the items.
� Atmospheric boiler combined with the
rinse booster pump for perfect rinsing
performances in terms of sanitation, energy
saving, independence from the water
pressure on the network. Incorporates
non-return (air gap class A) valve.
� As optional extra the RTM200 can be
equipped with a drying zone for fast and
efficient drying.
� The pre-wash, wash and rinse tanks are
pressed with completely rounded corners
and sloping base to facilitate cleaning.
� RTM200 has smooth surfaces. 304 AISI
stainless steel front and side panels,
strainers and wash and rinse arms.
� Wash arms and double tank filter (flat and
deep box) easy to remove.
� Height adjustable stainless steel feet.
� All models finished in top quality materials
with double skinned construction to aid
durability and reduce noise.
� Self-draining wash pumps provide
maximum hygiene.
� Hinged flap for easy access to the energy
saving condenser unit.
� Large balanced inspection doors for easy
access to wash area.
� Self-cleaning cycle in pre-wash, wash and
rinse zones.
� Automatic start/stop function.
� Advanced electric control panel with
sound signals and visual display.
� Counter balanced door with safety switch
and easy to grip handle.
� Built-in rinse water heater to increase the
temperature of the final rinse water.
� Electronic control panel with
autodiagnostic check control.
� 35mm thickness foam injection insulated
doors to reduce noise and reduce heat
dispersion.
� Available with version equipped with
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
� Separate pre-wash, wash and rinse tanks
for lower water and detergent consumption.
No overflow of the detergent from the wash
tank to the others and no need for fresh
water in order to cool down the water in
pre-wash tank.
� 98% recyclable by weight.
� CFC free packaging.
� Low noise level <70dBA.
� Developed and produced in ISO 9001 and
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.