Yamaha A-S700 - Manual (Page 10)

6
En
PREPARATION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Also, refer to the owner’s manual for each of your components.
• Use RCA stereo cable for audio units except speakers.
y
• The PHONO jacks are designed to connect a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise without the connection to
the GND terminal for some turntable(s).
CONNECTIONS
Connecting speakers and other components
CAUTION
Turntable
Tuner
Audio out
CD recorder,
etc.
CD player DVD player, etc.
Tape deck, etc.
Audio out
Audio out GND
Audio out
Audio
out
Audio
out
Audio in
Speakers A
Speakers B