Yamaha YAS-71CU - Manual (Page 27)

LISTENING TO FM BROADCASTS
23
En
Engli
s
h
OTHER
FUNCTIONS
1
Press
FM to set the input to FM.
“FM” appears in the front panel display.
2
Press
AUTO/MAN’L to switch Auto/Manual.
The AUTO indicator lights up when the system is set
to automatic tuning mode.
y
If a colon (:) appears, the system is set to preset tuning
mode. (
☞ P. 24)
3
Press
+/– once to begin automatic tuning.
When the system is tuned to a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
y
When you tune to an FM station using automatic tuning
mode, the system receives the FM radio signal in stereo
reception mode. The STEREO indicator appears in the front
panel display.
Basic tuning operation
No colon (:)
Lights up
Lights up
Manual tuning
If the signal received from the station you want to
select is weak, you can tune into the desired station by
specifying the frequency manually. In FM tuning
mode, press AUTO/MAN’L repeatedly so that the
AUTO indicator disappears, and then press +/–
repeatedly to specify the frequency of the desired
station.
If you tune to a station using the manual tuning feature,
the system receives the FM radio signals in monaural
reception mode to increase signal quality.