ZALMAN AMD Athlon/ Duron/Athlon XP Socket 462 CPU - Manual (Page 8)

7
2) Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU.
1) Fasten Nipples
Position the backplate on the bottom of the
mainboard under the CPU socket, then
fasten the nipples as shown on the right.
* When installing the ZM-WB2 on an Athlon
64, the retention frame is not needed.
3) Insert Hand screws
Insert hand screws into the outer holes on the clip.
4) Fasten Hand screws
Place the CPU block on the center of the CPU.
Screw in both hand screws in an alternating
fashion until they are completely tightened.
Outer hole Clip
Inner hole
9. Installation-AMD XP/Duron, Socket 462
CPU
Nipple
Main board
Thermal Grease
B-Type Clip Support
A-Type
Clip Support
Large Hole
Washer
Backplate