Yamaha DVD-E600 - Manual (Page 8)

6
Video Connections
The player has three types of video output jacks. Use one
of them in accordance with the input jacks of the
equipment to be connected.
Note:
– If your AV receiver has video output jacks, connect your
receiver (and then to your TV) so that you can use one TV for
several different video sources (LD, VCR etc.) by simply
switching the input source selector of your receiver.
S-Video terminal <A>
S (separate) video connection achieves a clearer picture
than composite video connection by separating color
and luminance when transmitting signals. Use
commercially available S-video cable.
Composite Video terminal <B>
Use audio/video cable supplied with this unit when
connecting the player to a TV.
Component Video terminal <C>
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance (Y,
terminal color-coded as green), and color difference (Pb,
blue/Pr, red). Use commercially available coaxial cables.
Receiver (and TV) with component input is required.
Observe the color of each jack when connecting.
SCART Connection <D>
Use a SCART cable to connect this unit’s AV terminal to
a SCART terminal on your TV.
Note:
– Ensure that the “TV” indication on SCART cable is
connected to the TV set and “DVD” indication on SCART
cable is connected to this unit.
AUDIO
OUT
AV
DIGITAL
OUT
VIDEO OUT
OPTICAL COAXIAL
VIDEO
S VIDEO
COMPONENT VIDEO OUT
E
L
P R P B Y
R
<C> <A> <B>
<D>
(supplied)
S
V
Preparation