Zanussi ZMD30STQ - Manual (Page 11)

ZMD30STQ
t
11
WARNING! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure not be observed.
•
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the
appropriate plug fitted.
•
Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of
shocks in case it should be plugged into a 13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE
If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug, proceed as follows:
• Connect the green and yellow (earth) wire to the
terminal in the plug which is marked with the letter ”E”
or the earth symbol (
) or coloured green and yellow.
• Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter ”N” or coloured
black.
• Connect the brown (live) wire to the terminal in the
plug which is marked with the letter ”L” or coloured red.
GREEN & YELLOW
BROWN
CORD CLAMP
BLUE
13
A
P1041
E
N
L
Electrical connections