Yamaha AX-892 - Manual (Page 22)

22
SPECIFICATIONS (AX-592)
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.015% THD
...............................................100W+100W
6 ohms, 20 Hz to 20 kHz, 0.03% THD
...............................................120W+120W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring
method)
8/6/4/2 ohms ...................140/170/220/290W
DIN Standard Output Power per Channel
[Europe model only]
(4 ohms, 1 kHz, 0.7% THD) ..............155W
IEC Power [Europe model only]
(8 ohms, 1 kHz, 0.015% THD) .............110W
Power Band Width
8 ohms, 50W, 0.03% THD
.............................................10 Hz to 50 kHz
Damping Factor SP-A
8 ohms, 20 Hz–20 kHz ..............320 or more
Maximum Output Power (EIAJ)
[General model only]
8 ohms, 1 kHz, 10% THD .................145W
6 ohms, 1 kHz, 10% THD .................170W
Input Sensitivity/Impedance
PHONO MM .....................2.5 mV/47 k-ohms
PHONO MC ......................160
µ
V/250 ohms
CD/TUNER/TAPE/AUX ....150 mV/47 k-ohms
MAIN IN .................................1 V/30 k-ohms
Maximum Input Signal (1 kHz, 0.007% THD)
PHONO MM......................................150 mV
PHONO MC ........................................10 mV
Output Level/Impedance
REC OUT .......................150 mV/0.6 k-ohms
PRE OUT ..............................1 V/1.2 k-ohms
Headphone Jack Rated Output/ Impedance
Output Level (8 ohms, 0.015% THD)
.............................................................0.33V
Impedance.....................................680 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/TAPE/AUX ....................0±0.5 dB
MAIN IN...........................................0±0.5 dB
RIAA Equalization Deviation
PHONO MM....................................0±0.3 dB
PHONO MC ....................................0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT (3V) .........0.003%
PHONO MC to REC OUT (3V) .........0.007%
CD/TUNER/TAPE/AUX to PRE OUT (1 V)
..........................................................0.005%
CD/TUNER/TAPE/AUX to SP OUT
(50W/8 ohms) ...................................0.008%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted) ..... 92 dB
PHONO MC (500 µV Input Shorted)... 76 dB
CD (CD DIRECT AMP ON Shorted) ... 110 dB
Residual Noise (IHF-A Network)
CD (CD DIRECT AMP ON) ...................35
µ
V
PURE DIRECT ON ............................. 90
µ
V
Channel Separation
CD/TUNER/TAPE/AUX (Input 5.1 k-ohms
Terminated 1 kHz/10 kHz).........65 dB/50 dB
Tone Control Characteristics
BASS: Boost/cut ................±10 dB (20 Hz)
Turnover Frequency.........(350 Hz)
TREBLE: Boost/cut...........±10 dB (20 kHz)
Turnover Frequency.....(3.5 kHz)
Filter Characterristics
SUBSONIC FILTER .........15 Hz, –18 dB/oct
Continuous Loudness Control
Attenuation ............................–30 dB (1 kHz)
(Level related equalization)
Gain Tracking Error (0 to –60 dB) ............2 dB
GENERAL
Power Supply
[U.S.A. and Canada models]
...........................................AC 120 V, 60 Hz
[Australia model].................AC 240 V, 50 Hz
[Europe and U.K. models] ..AC 230 V, 50 Hz
[General model]
..................AC 110/120/220/240V, 60/50 Hz
Power Consumption ...............................220W
[U.S.A model only] ...............................200W
AC Outlets
[U.S.A., Europe, Canada and General models]
3 SWITCHED OUTLETS ..100W max. total
[Australia and U.K. models]
1 SWITCHED OUTLET ....100W max. total
Dimensions (W x H x D)
......................................435 x 151 x 396 mm
(17-1/8” x 6.0” x 15-1/2”)
Weight ...........................10.6 kg (23 lbs. 4 oz.)
Accessories ...........Remote control transmitter
Batteries
Specifications subject to change without
notice.