Specifications, Troubleshooting – Yamaha DD-9 User Manual

Page 10

Advertising
background image

8

Specifications

In many cases, seemingly big problems or
malfunctions can be remedied easily. Please
check the following list before deciding that
your DD-9 is broken.
If the problem is not listed here or the suggested
remedy is ineffective, take the DD-9 to an
authorized Yamaha dealer for proper diagnosis
and repairs. Do not attempt to repair this digital
percussion instrument as serious damage may
occur.

A buzz or click occurs momentarily when the DD-9
is turned ON or OFF.

This is a normal power surge noise that occurs
when the POWER switch is operated.

The LED display is completely dark.

The batteries are low and should be replaced
immediately.

No sound comes from the speakers.

The volume is turned down too low and should be
adjusted up appropriately.

A plug is inserted into the HEADPHONES/AUX.
OUT jack and should be taken out immediately.

The wrong voice plays when you strike a percus-
sion pad.

The desired voice has not been assigned to the
percussion pad. Use the PAD ASSIGN function to
program the desired voice to the appropriate
percussion pad.

The custom pad voice assignments have disap-
peared or defaulted.

The batteries are low and should be replaced
immediately.

The POWER switch has been turned OFF and ON
and the default voices have replaced the desired
voices. Use the PAD ASSIGN function to program
the desired voices again.

When the percussion pads are struck, the LED
display goes dark momentarily and then changes
to the default reading “00”.

The batteries are low and should be replaced
immediately.

Percussion pads

4 (touch sensitive)

SE pads

4

Percussion sets

9 preset + 1 custom

Auto Rhythm Styles

100

Instrument and Sound Effect Voices

55

Auxiliary Functions

Tap Start, Auto Roll, Auto
Rhythm Style, Demonstration
Song

Panel Controls

POWER switch, SELECTOR
dial, VOLUME buttons, STYLE
button, PERC. SET button,
TEMPO button, TAP START
button, PAD ASSIGN buttons,
START/STOP button, AUTO/
ROLL button, SE SELECT
button, DEMO button

LED Display

STYLE/PERCUSSION SET/
TEMPO and other settings

Connectors

DC IN 10-12V
Headphones/AUX.OUT

Main amplifier

3.8W (EIAJ)

Speaker

10.0cm

Power Source

AC power adaptor

YAMAHA PA-1, PA-1B, or PA-3
(sold separately)

Batteries

Six “AA” size, SUM-3, R-6, or
equivalent batteries
(sold separately)

Dimensions (W x D x H)

435mm x 236mm x 160mm
(17 1/8” x 9 1/4” x 6 1/3”)

Weight

1.4 Kg (3 lbs., 1oz.)

Supplied accessories

Percussion Sticks
Voice List

* Specifications subject to change without notice.

Troubleshooting

Advertising