Xerox 2314 - Manual (Page 12)

11Mbps Wireless Internet Broadband Router
11
2.1.5 Rear Panel
The rear panel of the router has one Reset button at the left. At the right area are the
Internet and LAN ports and a power connector. Figure 2-2 shows rear panels of these
routers. Table 2-4 explains the function of the port.
Figure 2-2 Rear panel of the Wireless Internet Broadband Router with
Fixed Antenna and one Reverse SMA Antenna
Reset Button Internet & LAN Ports DC Input Port
Table 2-4 All Port Functionality
Port Function
Reset
Pressing the Reset button for more than 3 seconds to
restore to the factory default setting.
LAN port This is where you connect to the PC.
Internet port This is where you connect to the Cable/DSL modem.
DC Input Port To connect the adapter to receive power.
Caution: Reset Button
Pressing the Reset button for more than 3 seconds while the router powers up will
restore to factory default setting. Note that this should be done only when you had tried
all the troubleshooting options. Pressing the Reset button during operation may bring
you into the risk of creating IP address conflict between your PC and the router. In such
a case, you may be compelled to reboot your entire system(s).