Zenith MBR3430 - Manual (Page 2)

REMOTE CONTROL MODEL MBR3430
TV OPERATIONS
The following functions and operations apply to your Zenith
TV. The remote control must be in the TV mode to operate
your TV.
MODE
Used to select the TV mode of
operation.
TV
Lights when TV mode of
operation is selected.
CC (Closed Captions)
Used to view closed captions
broadcast with some television
programs.
MENU, SELECT and ADJUST
Used with on-screen menus to
see menu, select an option, and
adjust that option.
Numbered Buttons
Used to select a TV channel.
ENTER
Used to view the Channel/Time
Display or to remove any
screen menu or display.
LEARN
Used to program remote.
PIP
Used to activate
Picture-In-Picture inset.
SWAP
Used to swap picture in PIP inset
with the main television picture.
Point toward your
OFF/ON
Used to turn TV ON or OFF.
SOURCE
Used to display the menu of TV
sources for some TVs. Press again
to step through the source
selections. On some TVs, press to
select AUX (Auxiliary) channel,
FLASHBK (Flashback)
Used to return to the last TV
channel you were watching.
CHANNEL Up/Down
Used to sequence through the TV
channels.
VOLUME Up/Down
Used to adjust the TV’s volume.
MUTE
Used to turn off sound while the
picture remains. Press again to
restore the sound.
SPATIAL EQUALIZATION
Used to select SEQ audio mode on
TVs equipped with SEQ feature.
FREEZE
Used to the motion of the
\
picture on the PIP inset.
TIMER
Used to activate the SLEEP
TIMER. Press repeatedly to select
desired turn-off time.
2736-O
4 - 2