Technical data – Ariston Aqualtis AQ8F 29 U H User Manual

Page 3

Advertising
background image

EN

3

65 - 100 cm

 If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

 Never use second-hand or old inlet hoses; use the

products supplied with the machine.

Connecting the drain hose

Connect the drain hose to

drain duct piping or a wall

drain located between 65

and 100 cm above the

floor, making sure it is not

bent at all.

Alternatively, rest the drain

hose on the side of a

washbasin or bathtub,

fastening the duct

supplied to the tap (see

figure).

The free end of the hose

should not be underwater.

 We advise against the use of hose extensions; if it is

absolutely necessary, the extension must have the same

diameter as the original hose and must not exceed 150

cm in length.

Electrical connections

Before plugging the appliance into the electricity socket,

make sure that:

• the socket is earthed and complies with all applicable

laws;

• the socket is able to withstand the maximum power

load of the appliance as indicated in the Technical

data table (see opposite);

• the power supply voltage falls within the values

indicated in the Technical data table (see opposite);

• the socket is compatible with the plug of the

appliance. If this is not the case, have the socket or

the plug replaced.

 The machine must not be installed outdoors, even in

covered areas. It is extremely dangerous to leave the

appliance exposed to rain, storms and other weather

conditions.

 The mains socket must remain within easy reach after

the washing machine has been installed.

 Do not use extension cords or multiple sockets.

 The cable should not be bent or compressed.

 The power supply cable and plug must only be

replaced by authorised technicians.

Warning! The company shall not be held responsible in

the event that these regulations are not respected.

Technical data

Model

AQ8F 29 U H

Dimensions

width 59.5 cm

height 105 cm
depth 64,5 cm

Capacity

from 1 to 8 kg

Electrical

connections

please refer to the technical data

plate fixed to the machine

Water connections

maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)

drum capacity 62 litres

Spin speed

up to 1200 rotations per minute

Energy rated
programmes

according to

regulation

2010/1061

programme ;

temperature 60°C and 40°C;

Energy rated

programmes

according to

regulation

EN 60456

programme ; temperature 60°C;

using a load of 8 kg.

This appliance conforms to the
following EC Directives:

- 2004/108/EC (Electromagnetic

Compatibility)
- 2006/95/EC (Low Voltage)

- 2002/96/EC

CH

RU

TR

Advertising