Zanussi DA 6152 - Manual (Page 5)

5
Loading your appliance
Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.
Do not load very small items which can fall
through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned horizontally
in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
For best results we recommend you use the cutlery grids
provided (if the size and the dimensions of the cutlery
allow it).
The cutlery basket is in two parts which can be separated
to give greater loading flexibility. To separate the two parts,
slide them horizontally in opposite directions and pull them
apart. To reassemble, reverse the procedure.
Using your appliance
UI48
UI21
UI62
UI63