ZyXEL Communications ZyXEL ZyWALL 2WE - Manual (Page 284)

ZyWALL 2 and ZyWALL 2WE
25-2 Call Scheduling
and 4 as the ZyWALL, by default, applies the lowest numbered set first. Set 2 will take precedence over set
3 and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
To delete a schedule set, enter the set number and press [SPACE BAR] and then
[ENTER] or [DEL] in the Edit Name field.
To set up a schedule set, select the schedule set you want to setup from menu 26 (1-12) and press
[ENTER] to see Menu 26.1 - Schedule Set Setup as shown next.
Figure 25-2 Schedule Set Setup
If a connection has been already established, your ZyWALL will not drop it. Once the connection is
dropped manually or it times out, then that remote node can't be triggered up until the end of the Duration.
Table 25-1Schedule Set Setup Fields
FIELD DESCRIPTION OPTIONS
Active Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER]
to activate the schedule set. Yes
No
Start
Date Enter the start date when you wish the set to take effect in year -month-
date format. Valid dates are from the present to 2036-February-5.
Menu 26.1 - Schedule Set Setup
Active= Yes
Start Date(yyyy/mm/dd) = 2000 – 01 - 01
How Often= Once
Once:
Date(yyyy/mm/dd)= 2000 – 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh:mm)= 00 : 00
Duration (hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle