ZyXEL Communications U-336SA - Manual (Page 94)

80 Fax Operation
Response Value Function and Description
hsc=
70-8F Receive phase B hang up codes. Refer
to TIA-592 for details.
hsc=
90-9F Receive phase C hang up codes. Refer
to TIA-592 for details.
hsc=
A0-BF Receive phase D hang up codes. Refer
to TIA-592 for details.
+FIS:vr,br,wd,ln,
df,ec,bf,st Remote fax station capabilities (DIS
frame information) response refer to
+FIS=... command for a description of
sub-parameters.
+FNC:
"NSC FIF string" Report NSC (non-standard
Commands) frame
+FNF:
"NSF FIF string" Report NSF (non-standard Facilities)
frame.
+FNS:
"NSS FIF string" Report NSS (non-standard Setup)
frame.
+FPI:
"CIG ID string" Report remote ID response-Polling
Station ID (CIG).
+FPO Remote polling indication.
+FPS:ppr,lc,blc,c
blc,lbc .30 phase C page reception response:
ppr=1 Received page good.
ppr=2 Page bad; retrain requested.
ppr=3 Page good; retrain requested.
ppr=4 Page good; remote request for
procedure interrupt accepted.
ppr=5 Page bad; retrain requested; remote
request for procedure interrupt
accepted.
The receiving DCE may count <lc>,
<blc>, <cblc> and <lbc> due to DCE