Zanussi ZCE 7701 - Manual (Page 14)

14
B) To Set The Timer To Switch Off Only
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00 a.m. as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ) and press the
increase control ( + ) until the cooking time is
displayed, e.g. 2 hrs 15 mins. as Fig. 10.
iv) Release the buttons. The AUTO display will glow
and the time of day will be displayed after 5
seconds.
v) Set the oven temperature. The oven indicator
neon should be ON.
vi) To check the stop time during the cooking period,
simply press the stop time button ( ) and the
stop time will be displayed, as Fig. 11.
4. RETURNING THE APPLIANCE TO
MANUAL OR TO CANCEL AN
AUTOMATIC PROGRAMME
At the end of a timed cooking period, the AUTO light
will flash and a bleeper will sound for up to 2 minutes.
This can be stopped by pressing any of the 4 left
hand side buttons, as Fig. 12.
Turn oven control to the OFF position. The AUTO
display will continue to flash.
Press ( ) button. The AUTO display will go out, as
Fig. 13.
Turn the oven control ON to check that the oven
operates manually. The oven indicator neon will
glow.
Turn all controls OFF. No indicator neons should be
illuminated.
Fig. 9.
Fig. 10.
Fig. 11.
Fig. 12.
Fig. 13.