Zanussi ZDM 869 - Manual (Page 8)

8
☞
TO PROGRAMME THE OVEN
TO SWITCH OFF ONLY
This is useful if you want to begin cooking
immediately but have the oven switch off
automatically.
1. Set the oven function control knob and the
thermostat control knob on the required settings.
2. Place food in the oven.
3. Press button
and, at the same time, turn the
time setting knob until the required cooking
duration is displayed.
Our diagram shows the timer set for 30 minutes.
At the end of the cooking time the oven will switch
off and an alarm will sound. To switch off the alarm
press button
.
☞
TO PROGRAMME THE OVEN
TO SWITCH ON AND OFF
1. Ensure the clock is showing the right time of day.
2. Carry out steps 1, 2 and 3 as explained in "To
programme the oven to switch off only".
3. Press button and at the same time turn the
time setting knob until the end cooking time is
displayed.
Our diagram shows the end cooking time set for 30
minutes past noon. At the end of the cooking time the
oven will switch off and an alarm will sound. To
switch off the alarm press button
.
☞
TO SET THE TEMPERATURE FOR
THE MEAT PROBE
Detailed instructions for this feature are given at
page 21.
1. Insert the jack plug of the meat probe into the
socket situated on the left hand side of the oven.
2. Insert the probe into meat and close the oven door.
3. Press button
and, at the same time, turn the
temperature setting knob until the required
temperature is displayed. Our diagram shows the
meat probe temperature set for 70
°
C.
4. Set the oven function control knob and the
thermostat control knob on the required settings.
5. When cooking is completed, an alarm will sound.
To switch off thr alarm press button .
6. Remove the meat probe after use.
☞
TO CANCEL A PROGRAMME
1. Press button and, at the same time, turn the
time setting knob until the cooking duration is set
on "zero".
3. If the end cooking time has been set too, press
button and at the same time turn the time
setting knob until the end cooking time is set on
"zero".