Yamaha AX-397 EN - Manual (Page 12)

CONNECTIONS
8
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could
damage this unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Also, refer to the owner’s manual for each of your components.
• Use RCA type pin plug cables for audio/video units except speakers.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise without
the connection to the GND terminal for some record players.
•
CONNECTIONS
Connecting speakers and other components
CAUTION
SPEAKERS
TUNER
TAPE
IN
(PLAY)
OUT
(REC)
MD
AUX
GND
PHONO
CD/DVD
IN
(PLAY)
OUT
(REC)
+ +
A
B
– –
L R
R L R L
L R
L R
L R
+ – + –
+ – + –
L R L R
Turntable Tuner
Audio in Audio out
Tape deck, etc.
CD player or
DVD player
VCR, etc. MD recorder,
etc.
Audio out
Audio out GND
Audio out Audio out Audio out Audio in
Speakers A
Speakers B