Yamaha HTR-5460 - Manual (Page 35)

31
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC
OPERA
TION
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
TUNING
3 Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the “MEMORY” and “AUTO”
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
TUNING
MODE
AUTO/MAN'L MONO
MEMORY
MAN'L/AUTO FM
AUTO
FM/AM
Presetting Stations
■ Automatically presetting stations
(for FM stations)
You can use the automatic preset tuning feature to store
FM stations. This function enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. This feature enables you to easily tune in
to any preset station by selecting the preset station
number (see “Tuning in to a Preset Station”).
1 Press FM/AM to select the FM band.
2 Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode is stored along with the station frequency.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
“Manually presetting stations”.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations”.
Automatic preset tuning options
You can select the preset number from which the unit will
store FM stations and/or begin tuning toward lower
frequencies. Before automatic preset tuning begins (after
pressing MEMORY in step 3):
1. Turn the multi jog knob to select the preset number
under which the first station will be stored. Automatic
preset tuning will stop when stations have all been
stored up to E8.
2. Press PRESET/TUNING (EDIT) to turn off “ z ” and
then turn the multi jog knob to the left to begin tuning
toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
Lights up
MEMORY
VOLUME
TUNER MD/CD-R DVD D-TV/CBL VCR 1 VCR2/DVR V-AUX
AUTO
SILENT VIDEO AUX
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
6CH INPUT INPUT MODE
INPUT
VOLUME
PRESET
/TUNING
EDIT
MEMORY EFFECT
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
FM/AM DSP PROGRAM
BASS TREBLE SPEAKERS
A B
OFF ON OFF ON
STANDBY /ON
D I G I T A L
BASS EXTENSION
– + – +
SURROUND
D I G I T A L
1 3 2
0106V620(UCA)_29-33_EN 1/16/1, 11:15 AM 31