Xerox Troy PocketPro 100 - Manual (Page 29)

NPS/IPS Extension Operations Guide 3-1
3. Changing print modes
This chapter provides information on switching between the
various print modes of the printing system.
Changing from EPS print mode to NPS/IPS print mode
NOTE: You must be logged in the system as either a Trusted
User or System Administrator to switch from EPS to NPS/IPS
mode.
Use the following procedure to change operating modes of the
printing system from EPS mode to NPS/IPS mode.
1. On the DocuSP Print Services window, click the Queue
Manager module. The Queue Manager window opens.
2. In the Queue Manager window, hold all queues by performing
the following:
a. From the Options menu, select Select All.
b. From the Accept menu, select No.
c. From the Release Menu select No.