Zanussi ZGS 682 IC - Manual (Page 18)

18
It is important to install the elbow corr It is important to install the elbow corr It is important to install the elbow corr It is important to install the elbow corr It is important to install the elbow correctly ectly ectly ectly ectly, with the shoulder on , with the shoulder on , with the shoulder on , with the shoulder on , with the shoulder on
the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe. the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas. Failure to ensure the correct assembly will cause leakage of gas.
Gas Connection Gas Connection Gas Connection Gas Connection Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel
or copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.