Yamaha MDX-9 - Manual (Page 21)

21
ENGLISH
This function lets you title recorded MDs and the individual
tracks. Titles may consist of uppercase and lowercase
letters, numbers, and symbols for a maximum of up to 250
characters for each title.
TITLING
1 To title a disc
Press & STOP to stop playback.
To title a track
• During stop mode
Use the jog dial (or SKIP $ or › on the remote) to select
the track you want to title.
• During playback or pause
Use the jog dial (or SKIP $ or › on the remote) to select
the track you want to title, or go directly to step 2 to title the
current track.
During playback, the unit automatically repeats the selected
track while are entering the title.
• During recording
Go directly to step 2 to title the current track.
Recording continues normally while you are entering the title
for the selected track.
2 Press TITLE to activate the title mode.
The cursor appears in the display.
3 Using the front panel
Press CHARA. repeatedly to select between
uppercase letters (A), lowercase letters (a), and
numbers (0).
Note : To access the symbols, press CHARA. repeatedly to
select “A”, then turn the jog dial to the left.
Using the remote
Press CHAR. repeatedly to select between uppercase
letters (A) and lowercase letters (a).
4 Use the jog dial (or the character buttons (or
SKIP $ or ›) on the remote) to select a
character, number, or symbol.
Example (using the remote):
To select “A”, press 1 [ABC] once.
To select “B”, press 1 [ABC] twice.
To select “C”, press 1 [ABC] three times.
To select “1”, press NUMBER , then press 1 [ABC] .
5 Press SET to move the cursor into position for the
next character.
6 Repeat steps 3 through 5 to complete your title.
To delete a character (ABCD = ABD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
of the character you want to delete.
2 Press DELETE .
To insert a character (ABCD = ABTCD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
where you want to insert the character.
2 Use CHARA. and the jog dial (or CHAR. and the character
buttons on the remote) to select the new character.
3 Press SET to set the character. The character previously in
that position automatically moves to the right.
To insert a space (ABCD = AB CD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
where you want to insert the space.
2 Press +10 [SPACE] on the remote.
7 Press TITLE to exit the title mode.
If a title consists of more than 12 characters, it will scroll
across the display once and then be displayed in abbreviated
form (first 12 characters only).
To undo TITLE
1 Press & STOP to display the total tracks and total
playing time on the disc.
2 Press EDIT repeatedly to display “Undo Title”, then
press ENTER .
“Undo OK ?” appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or & STOP ).
?
A–B
!
S/F
SCROLL DISPLAY
REPEAT
–
PROG
&
RNDM
# ) (
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
CHAR. TITLE SET DELETE NUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
SPACE
+10
s
MDX
CD-P
REC
SYNC TIME
M-MARK MONO/ST
2 3 5 4 & STOP
SEARCH ! ⁄
SEARCH
! ⁄
4
2
3
& STOP
5
4
DELETE
DELETE
TIMER
OFF PLAY REC
POWER
DISPLAY TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
INPUT
REC LEVEL
SEARCH
STOP
#
*
REC
+ —
NATURAL SOUND MINIDISC RECORDER MDX-9
0 10
PLAY/
PAUSE
&
⁄ !
› $
)
s