Zebra S4M User Manual
Page 38
Advertising
Operations
Media Loading Overview
32
13290L-001 Rev. A
S4M User Guide
10/21/05
Fanfold Media
To insert fanfold media, complete these steps:
1.
Flip down the media supply guide.
2.
Thread the fanfold media through the fanfold media slot on the rear of the printer.
3.
Drape the media over the media supply hanger.
4.
Flip up the media supply guide, and then slide it in until it touches, but does not restrict,
the edge of the media.
5.
Continue with the media loading procedure for the desired print mode.
Advertising