Yamaha YST-FSW100 - Manual (Page 8)

4
• The system connection
( U.S and CANADA model only )
This unit has a system connection jack. Use the
supplied system connector cable when connecting
a YAMAHA component equipped with a system
connector jack. When connected, the power mode
(
ON / OFF ) of this unit can be controlled by the
power button of the YAMAHA component. During
this time, set the Power button of this unit to
OFF .
The Power of this unit can be turned on even
when the power switch is set to OFF .
Note:
When the Power switch of this unit is set
to ON , the connected component will not
control the Power mode of this unit, even
though they are connected via a system
connection. The power mode of this unit
will always be
ON .
Connecting components and the
subwoofer to AC power
After you complete a subwoofer connection, plug
the amplifier, TV or other audio/video component,
and the subwoofer into an AC outlet of appropriate
voltage.
VOLTAGE SELECTOR
( For Asia and General models)
The voltage selector switch on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging this unit into the AC main supply. Voltages are
110–120/220–240 V AC, 50/60 Hz.
INPUT
SYSTEM
CONNECTOR
Subwoofer rear panel
SYSTEM
CONNECTOR
INPUT JACK
(U.S and CANADA model)
YAMAHA YSP-1 (For example)
VOLTAGE
SELECTOR
220V-240V 110V-120V